Epson Stylus C45 Driver Free Download
Epson Stylus C45 Software Must Be
Epson Stylus C45 Windows 7 And Vista

Click into the checkbox beside it to select it, and then click on Apply to set the port.

A port is an interface channel used for transferring data from the computer to a printer.

Epson Stylus C45 Software Must Be

In order to communicate and print successfully, the port setting in the printer driver software must be set correctly.Some users may receive an error message that indicates an issue with the port settings.

For example, if you are using a printer via a USB or network connection and receive the error message There was an error writing to LPT1, this would indicate that the print data has been sent to a port that Windows reserves for printers connected via a Parallel interface.In order to determine if the port is set correctly, we recommend checking the printer port setting in the printer driver and changing it if necessary.

Epson Stylus C45 Windows 7 And Vista

However, we recommend that you first follow the guidance in the following Related Article, returning to this article if advised to do so:.Note:Windows 10, Windows 8, Windows 7 and Vista operating systems do not support FireWire connections.The Epson printer must be used via a Parallel, a USB, or a network interface (e.g.

Ethernet, integrated Wi-Fi, a suitable Epson print server or Windows printer sharing).

Open the Printers or Devices and Printers folder via the Start menu or Control Panel.

If you require help with this step, see the following Related Article:Note:If an icon for your Epson printer is not listed, the driver is not installed.

The port setting must be correct for the way your computer connects to the printer.

For a printer connected to the computer via USB, the Port should be set to USB Virtual Printer Port (such as USB001, USB002).

For a printer connected to the computer via Parallel, the Port should be set to LPT1 (or LPT2, LPT3 if you have more than one Parallel interface port on your computer).

For a printer connected to a network via a network interface (wired Ethernet or wireless), the Port should be set to EpsonNet Print Port.

The port in the list which is ticked should indicate this - for example the Description column may display the printers IP address (e.g.

That starts 192.xxx.xxx.xxx - or 172.xxx.xxx.xxx for corporate networks).Check that the correct IP address is listed.

Epson Stylus C45 Driver Free Download

Driver Free Download Game You can check the current IP address assigned to the Epson printer or print server by printing a network status sheet or locating the device via EpsonNet Config.

If the port is set correctly, test the communication between the printer and computer by sending a test page to the printer.

However, if the port is not set correctly, for example the port is LPT1 when it should be USB, click into the box beside the correct port for your printer then click Apply (see Fig.

If your printer is using a USB or Parallel interface but you cannot find the required port setting, try scrolling down the list.

Click on the button below to view instructions on adding the port.

If you do not have an EpsonNet Print Port available in the ports list.

Follow for instructions about how to download and install an EpsonNet Print Port.Adding the printer port for network printers.

A window will appear with a choice of ports to add, click on EpsonNet Print Port from the list, and then click on New Port.Note:If you do not have the choice of EpsonNet Print Port, this means that EpsonNet Print has not been installed.

The Add EpsonNet Print Port Wizard will appear, displaying a list of printers detected on the network.

We recommend setting the Port Type to IP Address(Automatic) as this means the port will not have to be reconfigured if the printers IP address changes (if your router allocates IP addresses automatically using DHCP).

Click Finish. If your router has DHCP turned off, requiring you to allocate IP addresses manually, select the Port Type to IP Address(Manual).

In the Ports window, locate the port you added - it should display the port name or IP address.

Epson Stylus C45 Driver For Mac